Firebird3.0 に、既存のドライバーで接続する [Firebird]
pyfirebirdsql で Firebird 3.0 に接続できない
よくよく調べると、デフォルトでは接続できなくて firebird.conf をちょっと書き換えないといけない。
[firebird.conf]
んでもって↓で、サービス再起動
sudo /etc/init.d/firebird restart
AuthServer っていうのが、認証をID/Password を平文で送らないようにするもの
WireCrypt が、通信を暗号化するっていうオプションで、
Firebird3.0 では、通信の暗号化をデフォルトでは arc4 で行うみたい。
【AuthServer = Srp について】
Srp Protocol Version 13 というので connect するらしい
http://sourceforge.net/mailarchive/message.php?msg_id=28590974
http://markmail.org/message/5bcmxpsc4zmk7os3
http://www.ietf.org/rfc/rfc5054.txt
RFC で定義されてるのか・・・実装できる自信がない
よくよく調べると、デフォルトでは接続できなくて firebird.conf をちょっと書き換えないといけない。
[firebird.conf]
AuthServer = Srp, Win_Sspi, Legacy_Auth WireCrypt = Disabled
んでもって↓で、サービス再起動
sudo /etc/init.d/firebird restart
AuthServer っていうのが、認証をID/Password を平文で送らないようにするもの
WireCrypt が、通信を暗号化するっていうオプションで、
Firebird3.0 では、通信の暗号化をデフォルトでは arc4 で行うみたい。
【AuthServer = Srp について】
Srp Protocol Version 13 というので connect するらしい
http://sourceforge.net/mailarchive/message.php?msg_id=28590974
http://markmail.org/message/5bcmxpsc4zmk7os3
http://www.ietf.org/rfc/rfc5054.txt
RFC で定義されてるのか・・・実装できる自信がない
コメント 0